Lanforge Fire Traffic

LANforge Fire - Network Traffic and Voip Call Generator

Features and Transmit Characteristics	Description
Connection Types	Layer 2 and 3 - Raw Ethernet, TCP/IP and UDP/IP Layer 4 - FTP, HTTP, HTTPS, GOPHER, TELNET, PING, DNS,SNTP and NMAP VoIP - SIP, RTP and RTCP File Endpoints - NFS, iSCSI, or SMB (SAMBA) Multicast Wireless test appliance - Emulates up to 31 802.11a/b/g virtual stations
Transfer Rate	Fixed, Minimum and Maximum and transmit rates in bits per second. Random variation between the min and max creating a random stair-step pattern of data transmission over time.
Packet Size	Fixed, Minimum and Maximum and random in bytes.
Payload	The payload pattern for the data can be increasing, decreasing, zeros, ones, randomly generated and custom.
Port	Specify a particular port for IP traffic
ToS/QoS	For IP based protocols, you can specify the ToS (aka QoS) bits in the IP header.
TTL	This specifies the 'time-to-live' when configuring Multicast endpoints.
Checksum	Performs a 32-bit CRC calculation on the Payload.
VoIP	Specify SIP or H.323, CODEC, Ports, ToS, call setup, gateways, number of calls, ring time, Inter-Call gap and duration.
Virtual Interfaces	Emulates unique machines with one physical interface. Emulates Ethernet, IP, 802.1Q VLAN's and wireless virtual stations.