Router Delay Simulator-ECO

Router Delay Simulator-ECO
The Router Delay Simulator(RDS-ECO) allows DCE to DTE connections at data rates up to 5Mbps while simulating network delays. The user selectable delays are for both data and a control signal in each direction and range from 5 milliseconds(mS) to approximately 1250 mS, in 5 mS increments. The RDS-ECO allows users to test and pre-configure critical DTE equipment such as Routers (with software applications) along with an attached modem, digital service unit(DSU) or other network access device for reliable network operation while simulating additional network delay times.

The RDS-ECO has individual data interfaces that allow V.35, RS-530, RS-422/449, RS-232, X.21, TTL and HSSI serial connections for both DCE and DTE interfaces. The data interfaces may also be mix and matched such as V.35-to-RS-530 connections.

The RDS-ECO has status LED’s for each attached device which allows the user to visually confirm the presence of control signals.

Installation is fast and simple by setting the switches for delay time, clocking and Clear To Send(CTS) control. All signal crossover is provided within the RDS-ECO.

The RDS-ECO uses state of the art digital CMOS technology to provide a feature filled product at an affordable price. The units design offers a field programmable gate array(FPGA) for fast customer specified changes.

The RDS-ECO is housed in a sturdy metal enclosure and operates on 110/220VAC.

The unit has a three year warranty and a 24 hour turnaround on warranty repairs.

FEATURES/BENEFITS

• Interfaces Supported: RS-232, V.35, X.21, RS-422/449, RS-530, TTL and HSSI
• Timing - Accepts External Timing from attached DCE
• Network Simulation delays of 5mS up to 1250mS in 5mS increments
• Data Rates - Synchronous to 5Mbps
• Controls for RTS, CTS, DSR, DTR on a per port basis
• Status LED’s for each port allows ease of connection and trouble shooting
• 110/220VAC switch selectable
• Sturdy Metal Enclosure
  

 

SPECIFICATIONS

Application	Interconnection of a DCE and DTE device located within proximity of each other while simulating network delays times
Simulation Delay Times	5 milliseconds(mS) to approximately 1250 mS, in 5 mS increments, 256 possible settings
Capacity	One(1) DCE device One(1) DTE device
Data Rates	Up to 5Mbps
Data Channel Interfaces	Available in V.35, RS-530, RS-422/449, RS-232, X.21, TTL and HSSI
Surge Protection	Main power supply
Power Source	100-120 to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220 volt select switch, IEC Power Inlet, (2) 5mm Fuses
Dimensions	Height ....... 1.75 inches (4.44 cm) Width ........ 17.00 inches (43.18 cm) Length ....... 9.00 inches (22.86 cm)
Environmental	Operating Temperature....32º to 122º F (0º to 50º C) Relative Humidity.............5 to 95% Non-Condensing Altitude............................0 to 10,000 feet
Weight	2 pounds (0.914Kg)
Warranty	Three Years, Return To Factory
ORDERING INFORMATION	Part No: 133000 Model: RDS-ECO Description: Router Delay Simulator, external Clocking
Interfaces Available:	Part #: 129014 RS-232 DCE I/M 129032 RS-232 DTE I/M 129010 V.35 DCE I/M 129028 V.35 DTE I/M 129011 RS-530 DCE I/M 129029 RS-530 DTE I/M 129012 RS-422 DCE I/M 129030 RS-422 DTE I/M 129013 X.21 DCE I/M 129031 X.21 DTE I/M 129057 TTL I/M 151028 HSSI I/M
Included with each unit:	1) Operations Manual 2) U.S.A. Grounded Power Cord, Part # 713015 3) Optional Power Cords A) United Kingdom, Part # 713016 B) Continental Europe, Part # 713017 C) Other: Specify Country on Purchase Order
Optional Accessories	1) Spare Data Center Fuses A) 160ma Fuse, Qty (2) Part # 714000 B) 80ma Fuse, Qty (2) Part # 714001