Router Delay Simulator

Router Delay Simulator
The Router Delay Simulator (RDS) allows Router-to-Router connections at data rates up to 2.048Mbps while simulating network delays.. The user selectable delays are for both data and control signals and range from 5 milliseconds(mS) to approximately 1250 mS, in 5 mS increments. The RDS allows users to test and pre-configure Routers (with software applications)and other critical DTE equipment for reliable network operation while simulating network delay times.

The RDS has individual data interfaces that allow HSSI,V.35, RS-530, RS-422/449, RS-232, X.21 and TTL serial connections. The data interfaces may also be mix and matched such as V.35-to-RS-530 connection.

Installation is fast and simple by setting the external switches for Delay Simulation, Clocking, Carrier Operation and RTS to CTS delay. All clocking and signal crossover are provided within the RDS.

The RDS has status LED's for each attached DTE device which allows the user to visually confirm the presence of control signals.

The RDS utilizes state of the art digital CMOS technology to provide a feature filled product at a very affordable price. Our Field Programmable Gate Array (FPGA) design has allowed us to offer this product with a wide selection of user Delay Settings and Baud Rates.

The RDS is housed in a sturdy standalone or rackmount metal enclosure and operates on 110/220VAC.

The RDS has a three year warranty and a 24 hour turnaround on warranty repairs.

FEATURES/BENEFITS

• Interfaces supported: RS-232, V.35, X.21, RS-422, RS-530, TTL and HSSI
• Network Simulation delays of 5mS up to 1250mS in 5mS increments
• Data Rates - Synchronous to 2.048Mbps - Option for T2 (6.312Mbps)
• Controls for RTS/CTS delay, DSR, DTR on a per port basis
• Status LED's for each port allows ease of connection and trouble shooting
• Timing - Internal or accepts external timing from DTE for test purposes
• 110/220VAC switch selectable
• Sturdy Metal Enclosure
  

 

SPECIFICATIONS

Application	Interconnection of two Routers or DTE (Terminal) devices located within proximity of each other while simulating network delays times
Simulation Delay Times	5 milliseconds(mS) to approximately 1250 mS, in 5 mS increments
Capacity	Two (2) Routers or DTE's
Data Rates	Up to 2.048Mbps Option for T2 (6.312Mbit)
Data Channel Interfaces	Available in V.35, RS-530, RS-422/449, RS-232, X.21, TTL and HSSI
Surge Protection	Main power supply
Power Source	100-120 to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220 volt select switch, IEC Power Inlet, (2) 5mm Fuses
Environmental	Operating Temperature....32º to 122º F (0º to 50º C) Relative Humidity.............5 to 95% Non-Condensing Altitude............................0 to 10,000 feet
Dimensions	Height ....... 1.75 inches (4.44 cm) Width ........ 7.90 inches (20.07 cm) Length ....... 9.00 inches (22.86 cm)
Weight	2 pounds (0.914Kg)
Warranty	Three Years, Return to Factory
Ordering Information	Part #: 129000 Model: RDS Description: Router Delay Simulator Interfaces Available: Part #:   129014 RS-232 DCE I/M 129032 RS-232 DTE I/M 129010 V.35 DCE I/M 129028 V.35 DTE I/M 129011 RS-530 DCE I/M 129029 RS-530 DTE I/M 129012 RS-422 DCE I/M 129030 RS-422 DTE I/M 129013 X.21 DCE I/M 129031 X.21 DTE I/M 129057 TTL I/M 151028 HSSI I/M
Included with each unit:	1) Operations Manual 2) U.S.A. Grounded Power Cord, Part # 713015